The T-Mobile version of the Samsung Galaxy S3 with model number SGH-T999 has already received the Android 4.3 Jelly Bean update with firmware build number T999UVUEMJC.

Samsung Galaxy S3 (T-Mobile) SGH-T999 users who have already installed their devices with Android 4.3 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by Elite Recognized XDA-Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S3 users to root their devices easily without depending on the firmware. It completely supports Android 4.3 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Driver for Samsung Galaxy S3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CF-Auto-Root file works only on the Galaxy S3 (T-Mobile) SGH-T999. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S3 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S3 (T-Mobile) SGH-T999 (CF-Auto-Root-d2tmo-d2tmo-sght999.zip)
2. Odin 3.07

Steps to Root Galaxy S3 (T-Mobile) SGH-T999 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy S3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-d2tmo-d2tmo-sght999.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy S3 (T-Mobile) SGH-T999 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

Samsung recently released a new Android 4.3 Jelly Bean update with firmware build number N900XXUCMJ7 for the Exynos 5 octa-core variant of Galaxy Note 3 (SM-N900). The new official update is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: N900XXUCMJ7
CSC: N900OLBCMJ3
MODEM: N900DXUCMJ3
Version: Android 4.3
Build date: Oct 30, 2013
Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand

Samsung Galaxy Note 3 N900 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Note 3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.3 XXUCMJ7 Jelly Bean firmware is compatible only with Samsung Galaxy Note 3 with model number SM-N900. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 3 by navigating to Settings >> About Phone.

Files Required
1. Android 4.3 XXUCMJ7 Jelly Bean Firmware (Mirror Link) for Galaxy Note 3 N900
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Note 3 N900 with Android 4.3 XXUCMJ7 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted N900XXUCMJ7 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Note 3 N900 should be now updated with official Android 4.3 XXUCMJ7 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 3 N900 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

Southeast Asian owners of Samsung Galaxy S4 Exynos variant (GT-I9500) have received a new software update based on Android 4.2.2 Jelly Bean with firmware build number I9500XXUBMF8. The new official firmware is currently hitting Vietnam and Thailand as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: I9500XXUBMF8
CSC: I9500OLBBMF8
MODEM: I9500DXUBMF8
Version: Android 4.2.2
Built date: Jun 19, 2013
Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand

Samsung Galaxy S4 I9500 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Driver for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Android 4.2.2 XXUBMF8 Jelly Bean firmware is compatible only with Samsung Galaxy S4 I9500. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXUBMF8 Jelly Bean Firmware for Samsung Galaxy S4 I9500
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy S4 I9500 with Android 4.2.2 XXUBMF8 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 7: Choose the following files in Odin from extracted I9505XXUBMF8 firmware folder by using respective checkboxes:

• Select the PDA checkbox, and choose the file named .tar or .md5.
• Click the Phone checkbox, and choose the file with modem in its name (ignore if there is no such file)
• Click the CSC checkbox, and select the file with csc in its name (ignore if such file is missing)
• Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9500 should be now updated with official Android 4.2.2 XXUBMF8 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy S4 I9500 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

Samsung has recently released another Android 4.2.2 Jelly Bean update with base firmware I9152XWUAML3 for Galaxy Mega 5.8 with Dual SIM card slot (GT-I9152). The new official firmware is now available as an Over-The-Air (OTA) update in Southeast Asian countries.

Firmware details
PDA: I9152XWUAML3
CSC: I9152OLBAML1
MODEM: I9152XXUAML4
Version: Android 4.2.2
Built date: Dec 23, 2013
Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand

Samsung Galaxy Mega 5.8 I9152 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Mega 5.8 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Mega 5.8 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XWUAML3 Jelly Bean firmware is compatible only with the Samsung Galaxy Mega 5.8 (GT-I9152). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Mega 5.8 by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XWUAML3 Jelly Bean Firmware (Mirror Link 1, Link 2)
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Mega 5.8 I9152 with Android 4.2.2 XWUAML3 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Mega 5.8.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Mega 5.8 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9152XWUAML3 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Mega 5.8 I9152 should be now updated with official Android 4.2.2 XWUAML3 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Mega 5.8 I9152 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

Jika di sektor high-end  perusahaan ini baru saja melepas GALAXY Note 4 ke pasaran, tak lupa vendor ini pun merilis produk untuk memenuhi kebutuhan di pasar lini bawah. Android Samsung murah baru saja dihadirkan perusahaan ini secara diam-diam di beberapa negara dan dikhususkan untuk pengguna entry level. Android Samsung murah ini rencananya  akan dijual ke pasaran hanya dengan banderol Rp 1 jutaan.

Android Samsung murah ini dinamakan Samsung GALAXY V. Mengusung layar berukuran 4 inci, Android Samsung murah GALAXY V berjalan pada OS Android KitKat dan dilengkapi fitur Dual kamera. Ini dia ulasan spesifikasi dan fitur yang ada di dalam Android Samsung murah ini.

DESAIN DAN LAYAR

Melalui dimensi bodi berukuran 121.2 x 62.7 x 10.65 mm, perangkat Android Samsung murah ini memiliki pilihan warna Casing hitam dan putih yang dipadukan dengan Back Cover Leather yang sangat empuk dan membuatnya tidak panas saat dipakai secara aktif. Sementara pada sektor layarnya, perangkat ini mengusung layar sentuh kapasitif berukuran 4 inci dengan resolusi 800 x 480 piksel. Meskipun resolusi layarnya sangat biasa saja, tapi dengan kemampuan sentuhan responsifnya membuat Android Samsung murah ini mampu menutupi kekurangannya juga membuat penggunanya nyaman saat memakainya.

HARDWARE

Samsung GALAXY V didukung oleh prosesor Single Core berkecepatan 1.2 GHz. Berjalan pada sistem operasi Android 4.4.2 KitKat, Anda dapat memasang banyak aplikasi menarik yang ditawarkan oleh Google Play Store dan GALAXY Apps milik Samsung sendiri. Sementara jika Anda ingin memanfaatkan Android Samsung murah ini sebagai media penyimpanan terdapat memori internal berkapasitas 4 GB yang dapat diekspansi melalui Slot Micro SD.

KAMERA

Di sisi belakangnya, terdapat kamera utama beresolusi 3 MP yang dilengkapi dengan fitur LED Flash dan auto fokus. Sedangkan di sisi depan tersedia kamera VGA untuk Anda pakai ketika menjalankan fitur Video Call atau berfoto selfie. Memang kamera utamanya hanya menghasilkan kualitas foto yang pas-pasan, tapi melalui tambahan fitur LED Flash setidaknya foto kondisi Low Light dapat dibidik dengan cukup maksimal. Selain itu, LED Flash yang disematkan pada Android Samsung murah ini pun dapat dimanfaatkan sebagai senter.

KONEKTIVITAS

Android Samsung murah GALAXY V memiliki sebuah SIM Card yang berjalan pada jaringan GSM 850 / 900 / 1800 / 1900 dan HSDPA 850 / 900 / 1900 / 2100. Selain itu, terdapat pula beberapa fitur konektivitas yang bisa Anda pakai seperti Wi-Fi 802.11 b/g/n, Bluetooth 4.0 dan Micro USB.

FITUR LAIN

Selain fitur diatas, turut disematkan juga beberapa fitur pendukung pada Android Samsung murah GALAXY V ini seperti sensor Accelerometer, Radio FM, GPS, aplikasi khas Samsung seperti GALAXY Apps, S-Planner dan aplikasi Google Service seperti Google Play, Gmail, Google Maps dan YouTube. Untuk menunjang aktivitas Anda, disediakan baterai berkapasitas 1500 mAh.

KESIMPULAN

Meskipun fitur yang dihadirkan Samsung GALAXY V biasa saja, namun beberapa fitur utama mampu dihadirkan pada perangkat ini. Selain itu, GALAXY V pun dibalut desain dengan Back Cover Leather yang dapat menunjang penampilan penggunanya. Saat ini, Android Samsung murah GALAXY V sudah mulai dijual di beberapa negara seperti Vietnam, Malaysia dan India dengan harga Rp 1 jutaan saja. Tertarik meminang perangkat ini?

Read More..

Samsung Galaxy S4 I9505 (Snapdragon) users who have already updated their devices with Android 4.2.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy S4 I9505 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1) Install USB Driver for Samsung Galaxy S4 I9505 on the computer.
2) Enable USB Debugging Mode on the phone.
3) Make a backup of all your important data before following the guide.
4) The Galaxy S4 I9505 should be factory unlocked and not locked to any particular carrier.
5) Ensure the battery of the phone is charged more than 80 per cent.
6) The CF-Auto-Root file works only on Samsung Galaxy S4 I9505 (Snapdragon). Applying this on any incorrect variant will brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy S4 I9505 (CF-Auto-Root-jflte-jfltexx-gti9505.zip)
2. Odin 3.07

Steps to Root Galaxy S4 I9505 Running on Android 4.2.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4 I9505. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy S4 I9505 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn yellow with the COM port number. Additionally, the successful connected will be indicated by a message saying Added. If Odin fails to detect the device then re-install USB driver
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once flashing completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9505 (Snapdragon) running on Android 4.2.2 Jelly Bean firmware is now rooted successfully. You may now install any app that requires root permission.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

U.S. Cellular has started rolling out the Android 4.3 Jelly Bean update to its variant of the Galaxy Note 2 (SCH-R950). The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: R950VXUBMK3
CSC: R950USCBMK3
MODEM: R950VXUBMK3
Version: Android 4.3
Build date: Nov 11, 2013
Regions: U.S. (U.S. Cellular)

Samsung Galaxy Note 2 (U.S. Cellular) SCH-R950 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Note 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.3 VXUBMK3 Jelly Bean firmware is compatible only with the U.S. Cellular version of Galaxy Note 2 (SCH-R950). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 2 by navigating to Settings >> About Phone.

Files Required
1. Android 4.3 VXUBMK3 Jelly Bean Firmware (Mirror Link)
2. Odin 3.07

Steps to Update Galaxy Note 2 (U.S. Cellular) SCH-R950 with Android 4.3 VXUBMK3 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 2.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted R950VXUBMK3 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Note 2 (U.S. Cellular) SCH-R950 should be now updated with the Android 4.3 VXUBMK3 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 2 (U.S. Cellular) SCH-R950 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

Install ROM Android Revolution HD di Samsung Galaxy S3 | Salah satu hal yang membuat Sistem Operasi Android berbeda dari iOS adalah kemampuan untuk sepenuhnya menyesuaikan telepon anda. Saya tidak berbicara tentang menginstal tema atau menggunakan custom launcher di sini, melainkan tentang rooting ponsel dan Flash Custom ROM . Fitur ini sendiri dapat cukup untuk menarik pengguna iPhone ke OS Android. Setelah menginstal custom ROM, Anda bisa mendapatkan nuansa baru pada ponsel anda dengan banyak fitur baru. Hal ini dapat menjadi cara yang bagus untuk membuat sebagian besar dari ponsel anda, khususnya jika anda telah menggunakan ponsel anda untuk waktu yang lama.

Galaxy S3 adalah salah satu perangkat Samsung yang paling populer dari seri Galaxy S. Meskipun cukup lama, perangkat ini memungkinkan anda melakukan sebagian besar apa yang dapat anda lakukan di smartphone Android versi terbaru. Jika anda bosan dengan tampilan default Galaxy S3, maka saya sarankan anda menginstal Custom ROM. Jika anda ingin menginstal salah satu ROM paling keren di Galaxy S3, maka lanjutkan membaca artikel ini untuk mengetahui bagaimana Cara Menginstal Android Revolution HD Custom ROM pada Samsung Galaxy S3.

Android Revolution HD - ROM Untuk Samsung Galaxy S3

ROM Android Revolution HD adalah salah satu custom ROM yang paling populer yang tersedia untuk Galaxy S3, karena berfokus pada kecepatan, stabilitas dan kelancaran. ROM ini pada dasarnya merupakan versi perbaikan dari stock firmware Galaxy S3. Oleh karena itu, jika anda ingin menyimpan fitur standar, seperti antarmuka TouchWiz, tetapi juga ingin perbaikan yang signifikan dalam kinerja, maka ROM ini mungkin adalah pilihan terbaik.

ROM ini dilengkapi dengan beberapa fitur keren, termasuk optimasi RAM, optimasi kecepatan dan meningkatkan daya tahan baterai. ROM ini tersedia untuk Galaxy S3 I9300 dan anda tidak harus mencoba menginstal pada setiap varian lainnya.

Persyaratan Untuk Menginstall ROM

Seperti yang saya sebutkan sebelumnya, pastikan bahwa anda tidak mencoba untuk menginstal ROM pada varian selain I9300, karena mungkin perangkat anda akan mengalami hardbrick. Anda akan memerlukan Akses Root dan Custom Recovery untuk diinstal pada Galaxy S3 anda sebelum anda dapat mem-flash ROM. Instalasi Custom ROM adalah proses yang sangat beresiko dan jika tidak dilakukan dengan hati-hati, mungkin akan terjadi bricking pada ponsel anda. Saya tidak bertanggung jawab jika ada masalah dengan ponsel anda.

Sebelum melanjutkan dengan proses rooting, pastikan bahwa anda membackup semua file penting anda. Anda juga dapat menggunakan fitur backup bawaan ponsel atau aplikasi pihak ketiga dari Google Play Store. Jika anda tidak tahu tentang aplikasi backup yang baik, anda dapat membaca artikel tentang 5 Aplikasi Backup Terbaik Untuk Perangkat Android. Saya menyarankan agar anda membuat cadangan Nandroid penuh jika anda memiliki ruang penyimpanan yang tersedia pada ponsel anda.

Pastikan juga bahwa ponsel anda terisi minimal 70% sebelum melanjutkan dengan proses instalasi. Saya juga menyarankan kepada anda untuk mengunjungi thread resmi Android Revolution HD untuk mempelajari lebih lanjut tentang hal itu. Anda juga dapat meminta pengembang jika anda memiliki pertanyaan tentang fitur dari ROM atau proses instalasi.

Cara Install Android Revolution HD ROM

Pastikan bahwa anda mengikuti semua langkah yang disebutkan di bawah ini dengan hati-hati. Jika tidak diikuti dengan benar, anda mungkin mengacaukan perangkat anda. Seluruh proses ini tidak begitu sulit dan hanya selesai dalam beberapa menit saja.

• Download Android Revolution HD ROM pada PC Anda.
• Hubungkan Galaxy S3 ke PC menggunakan kabel USB mikro dan klik "Open Folder" untuk melihat file dalam popup AutoPlay.





• Transfer file ROM yang berformat zip ke direktori root ponsel anda. Putuskan telepon anda dari PC anda.
• Matikan ponsel anda dan hidupkan kembali sambil memegang tombol Power, Home dan tombol Volume Up secara bersamaan. Sekarang anda akan boot ke recovery mode.



• Arahkan ke "Wipe data / factory reset" menggunakan tombol Volume dan pilih dengan menggunakan tombol Power. Anda harus konfirmasikan dengan memilih Yes.





• Pilih opsi "Wipe Cache Partition" dan konfirmasikan dengan memilih Yes.





• Buka "Advanced" dalam recovery dan pilih opsi "Wipe Dalvik Cache" .





• Pilih opsi "Install zip from sdcard".





• Pilih "Choose zip from sdcard", arahkan ke folder di mana anda menyimpan file zip ROM dan pilih.





• Tunggu proses flashing untuk menyelesaikan. Ini mungkin memakan waktu cukup lama. Setelah ROM tersebut berhasil di flashing, pilih opsi "Reboot System Now " dalam mode recovery. 
• Terakhir anda telah berhasil menginstal Android Revolusi HD ROM pada Galaxy S3. Ponsel Android anda sekarang akan reboot. Jika ponsel anda membutuhkan waktu yang lama untuk reboot, Anda tidak perlu panik karena ini adalah normal.

Kesimpulan

Instalasi Custom ROM adalah salah satu fitur favorit saya di perangkat Android. Custom ROM tidak hanya meningkatkan secara keseluruhan kinerja ponsel anda, tetapi mereka juga membawa beberapa fitur baru dan pilihan kustomisasi. Jika anda sudah menggunakan ponsel Samsung Galaxy S3 untuk waktu yang lama dan mencari sesuatu yang berbeda, maka anda pasti harus mempertimbangkan memasang Custom ROM. Android Revolution HD adalah salah satu ROM yang patut anda gunakan untuk Samsung Galaxy S.

Menginstal ROM ini adalah proses berisiko dan jika anda tidak mengikuti instruksi yang diberikan dengan benar, bisa saja perangkat anda mengalami hardbrick atau mati total. Perangkat anda juga harus sudah di root untuk melanjutkan instalasi. Pastikan bahwa anda membackup ponsel anda sebelum menginstal ROM.

Saya sangat menyarankan anda mengunjungi thread XDA untuk Android Revolusi HD ROM untuk mempelajari lebih lanjut tentang hal itu. Anda juga dapat meminta pengembang jika anda memiliki pertanyaan tentang fitur dari ROM atau proses instalasi. Pastikan bahwa anda mengikuti langkah-langkah yang disebutkan di atas dengan benar agar tidak terjadi hal-hal yang tidak di inginkan.

Read More..

Samsung has just started to push Android 4.2.2 Jelly Bean update with firmware build numbers N5120XXCMH1 to the LTE version of Galaxy Note 8.0 (GT-N5120).

Samsung Galaxy Note 8.0 (LTE) N5120 users who have already updated their devices with Android 4.2.2 XXCMH1 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA Developers, Chainfire. The CF-Auto-Root file allowing Galaxy Note 8.0 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Note 8.0 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 8.0 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on Samsung Galaxy Note 8.0 (LTE) N5120. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 8.0 by navigating to Settings >> About Phone.

Files Required
1. CF-Auto-Root for Galaxy Note 8.0 (LTE) N5120 (CF-Auto-Root-konalte-konaltexx-gtn5120.zip)
2. Odin 3.07 (Mirror Link)

Steps to Root Galaxy Note 8.0 (LTE) N5120 Running on Android 4.2.2 XXCMH1 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Switch off the Galaxy Note 8.0. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy Note 8.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-konalte-konaltexx-gtn5120.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Note 8.0 (LTE) N5120 running on Android 4.2.2 XXCMH1 firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Read More..

call recorder galaxy s2 s3 full v1 9 32 www viprasys org itz Pakistani

Type : rar

Size : 132 KB

Artis :
Android Download Tool

Rating :

Search Result

call recorder n beepoff.sis - Fast and reliable file hosting, file ...
Source title: call recorder galaxy s2 & s3 full | v1.9.32 | android | 1 mb | [putlocker] ... call recorder galaxy s2 s3 full v1 9 29 www viprasys org itz Pakistani

Usenet.nl Registration | Register now for a free trial!
Register now for a 14 days free trial period with no obligation!

Searches from PK on 25-04-2011 - Picktorrent.com - Search Torrents ...
... aasman ke neechay pakistani the hero full hd ... ps3 emulator gta manhunt Om ... halchal hindi film nod 32 nokia call recorder for 6220c real india ...

Mediafire search, mediafire search engine - Direct download links ...
Free Search Engine for Mediafire. Type what you are looking for on the box bellow, hit search and download it!

Astatalk - Underground community - download everything
Console Games for PS3; ... office 2010 emily soto mental ray call of duty enstella urban rivals hack v2.92 by ... performancetest adobe incopy cc 9.0 ...

Video Subdir Index - A Bouquet full of Videos...
De Acht (v. 1.2) koster and macher ... ( pakistani punjabi stage drama) 15 of 19 santa cristina Virginia Zeani as Lucia di Lammermoor 1/6 ... Call Of Duty 3 PS3 online

LemonShare.Net - Taste the Lemon and Share It! Only RapidShare ...
Scene Release,LemonShare.Net - Taste the Lemon and Share It! Only RapidShare Downloads!

Searches from -- on 10-09-2012 - Picktorrent.com - Search Torrents ...
torrent search, torrents download, torrentz, free torrents, the torrents, movie download, software download, anime torrents

Get Content Here
32 1. 1 124 1. 9 5 1. 19.304469999999998 84.792923000000002 14 2 1. 24.268749 87.247046999999995 8 6 1. 19.076191000000001 72.875877000000003 12 5 1. 35.736221

airproject2010.googlecode.com
... 32 full;143 hash;5 diapers;3 attendence;1 ... ps3;12 halamak;1 renewed;6 euros;1 nestling;1 ... pakistani;1 scans;1 faast;1 bulldog;1 explanation;2

Description

... 32 full;143 hash;5 diapers;3 attendence;1 ... ps3;12 halamak;1 renewed;6 euros;1 nestling;1 ... pakistani;1 scans;1 faast;1 bulldog;1 explanation;2,32 1. 1 124 1. 9 5 1. 19.304469999999998 84.792923000000002 14 2 1. 24.268749 87.247046999999995 8 6 1. 19.076191000000001 72.875877000000003 12 5 1. 35.736221,torrent search, torrents download, torrentz, free torrents, the torrents, movie download, software download, anime torrents,Scene Release,LemonShare.Net - Taste the Lemon and Share It! Only RapidShare Downloads!,De Acht (v. 1.2) koster and macher ... ( pakistani punjabi stage drama) 15 of 19 santa cristina Virginia Zeani as Lucia di Lammermoor 1/6 ... Call Of Duty 3 PS3 online,Console Games for PS3; ... office 2010 emily soto mental ray call of duty enstella urban rivals hack v2.92 by ... performancetest adobe incopy cc 9.0 ...,Free Search Engine for Mediafire. Type what you are looking for on the box bellow, hit search and download it!,... aasman ke neechay pakistani the hero full hd ... ps3 emulator gta manhunt Om ... halchal hindi film nod 32 nokia call recorder for 6220c real india ...,Register now for a 14 days free trial period with no obligation!,Source title: call recorder galaxy s2 & s3 full | v1.9.32 | android | 1 mb | [putlocker] ... call recorder galaxy s2 s3 full v1 9 29 www viprasys org itz Pakistani

Similar Post

• Los Androides Ayer Te Vi (Prod By Hyde \El Verdadero Quimico\ & Alzule \El Bioquimico\)(New World Reggaeton)
• DampferWelle
• S5360DXLF2 OLBLG1 THL Thailand Android 2 3 6
• Photo Comics Pro v 1 364 CP apkmania com
• st16
• GameHouse Doodle Jump v1 14 04 Android AnDPDA
• iOS Temple Run Oz v1 0 fullteklinkindir
• LastPass 2 0 2
• [Android] Rom Manager 3 0 1 4 + Premium Key [ D O W ]
• Los Androides feat Gocho Besandote Toa

Read More..