Google Nexus 5 has already received the latest Android 4.4.1 KitKat OTA update with build number KOT49E.

Nexus 5 users who missed the OTA update notification or cannot wait for its official release, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install the Android SDK. The package includes the necessary drivers for connecting Nexus 5 to the computer.
2. Make a backup of all your important data before following the guide.
3. Enable USB Debugging Mode on the phone. Go to Settings >> About Phone. Tap on Build Number several times till the message shows "You are now a Developer". Exit from "About Phone" and find the "Developer Options" settings. Enable USB debugging.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.4.1 KOT49E KitKat file is compatible only with the Nexus 5 running on Android 4.4 KRT16M KitKat. Applying this to any incorrect variant might brick the device. Verify the device model number by navigating to Settings >> About Phone.

File Required
1. Android 4.4.1 KOT49E KitKat for Nexus 5

File name: 7ed504f678cea49ecf0974e8cd956e2974e3f943.signed-hammerhead-KOT49E-from-KRT16M.7ed504f6.zip
MD5 sum: d465ab3e78e3d99708687cfb1abf1f14
Size: 54 MB

Steps to Update Nexus 5 (Non-Rooted) with Android 4.4.1 KOT49E KitKat
Note: Make sure your Nexus 5 is NOT rooted and has stock recovery.

Step 1: Rename the Android 4.4.1 KOT49E KitKat .zip file to update.zip.
Step 2: Connect the Nexus 5 to the computer using USB cable. Then copy the update.zip file to the SD card of your phone. Make sure the file is in the root folder.
Step 3: Switch off the Nexus 5. Then boot the device into Fastboot mode by pressing and holding Volume Up and Power buttons together.
Step 4: Follow the on-screen navigation instructions. Then press Volume Up button several times to enter Recovery Mode. An exclamation mark should now appear on the screen. Press and hold the Volume Up and Power buttons together to enter Recovery Mode.
Step 5: Select "update from SD card" option and then navigate to the update.zip file that you copied earlier and confirm the installation by pressing the Power button. The installation should now begin.
Step 6: Once the installation process completes, your phone will boot automatically. It may take about 5 minutes to complete.

Nexus 5 should be now updated with the Android 4.4.1 KOT49E KitKat. Head over to Settings >> About Phone to verify the software version running on the device.

Steps to Update Nexus 5 (Rooted) with Android 4.4.1 KOT49E KitKat
Note: Make sure you have ClockworkMod recovery installed on the Nexus 5.

Step 1: Connect the Nexus 5 to the computer using USB cable. Then copy the Android 4.4.1 KOT49E KitKat .zip file to the SD card of your phone. Make sure the file is in the root folder.
Step 2: Switch off the Nexus 5. Then boot the device into Fastboot mode by pressing and holding Volume Up and Power buttons together.
Step 3: Follow the on-screen navigation instructions. Then press Volume Up button several times to enter Recovery Mode.
Step 4: In CWM Recovery, select "flash zip from SD card" and then select "choose zip from sdcard". Then navigate to the Android 4.4.1 KOT49E KitKat .zip file that you copied earlier and confirm the installation by pressing the Power button. The installation should now begin.
Step 5: Once the installation process completes, return to main Recovery Menu and select "reboot system now". The phone will boot now and it may take about 5 minutes to complete.

Nexus 5 should be now updated with the Android 4.4.1 KOT49E KitKat. Head over to Settings >> About Phone to verify the software version running on the device.

Read More..

Samsung recently released a new Android 4.3 Jelly Bean update with firmware build number N900XXUCMJ7 for the Exynos 5 octa-core variant of Galaxy Note 3 (SM-N900). The new official update is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: N900XXUCMJ7
CSC: N900OLBCMJ3
MODEM: N900DXUCMJ3
Version: Android 4.3
Build date: Oct 30, 2013
Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand

Samsung Galaxy Note 3 N900 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Note 3 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 3 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.3 XXUCMJ7 Jelly Bean firmware is compatible only with Samsung Galaxy Note 3 with model number SM-N900. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 3 by navigating to Settings >> About Phone.

Files Required
1. Android 4.3 XXUCMJ7 Jelly Bean Firmware (Mirror Link) for Galaxy Note 3 N900
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Note 3 N900 with Android 4.3 XXUCMJ7 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 3.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted N900XXUCMJ7 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Note 3 N900 should be now updated with official Android 4.3 XXUCMJ7 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 3 N900 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

Southeast Asian owners of Samsung Galaxy S4 Exynos variant (GT-I9500) have received a new software update based on Android 4.2.2 Jelly Bean with firmware build number I9500XXUBMF8. The new official firmware is currently hitting Vietnam and Thailand as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: I9500XXUBMF8
CSC: I9500OLBBMF8
MODEM: I9500DXUBMF8
Version: Android 4.2.2
Built date: Jun 19, 2013
Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand

Samsung Galaxy S4 I9500 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Driver for Samsung Galaxy S4 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The Android 4.2.2 XXUBMF8 Jelly Bean firmware is compatible only with Samsung Galaxy S4 I9500. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXUBMF8 Jelly Bean Firmware for Samsung Galaxy S4 I9500
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy S4 I9500 with Android 4.2.2 XXUBMF8 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Power off your phone. Wait 5-6 seconds for vibration to confirm complete switch off.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 7: Choose the following files in Odin from extracted I9505XXUBMF8 firmware folder by using respective checkboxes:

• Select the PDA checkbox, and choose the file named .tar or .md5.
• Click the Phone checkbox, and choose the file with modem in its name (ignore if there is no such file)
• Click the CSC checkbox, and select the file with csc in its name (ignore if such file is missing)
• Choose the PIT checkbox, and choose the .pit file. Use only the file obtained during extracting in step 1 above, otherwise ignore it.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the START button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy S4 I9500 should be now updated with official Android 4.2.2 XXUBMF8 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy S4 I9500 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

Samsung has recently released another Android 4.2.2 Jelly Bean update with base firmware I9152XWUAML3 for Galaxy Mega 5.8 with Dual SIM card slot (GT-I9152). The new official firmware is now available as an Over-The-Air (OTA) update in Southeast Asian countries.

Firmware details
PDA: I9152XWUAML3
CSC: I9152OLBAML1
MODEM: I9152XXUAML4
Version: Android 4.2.2
Built date: Dec 23, 2013
Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam, Thailand

Samsung Galaxy Mega 5.8 I9152 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Mega 5.8 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Mega 5.8 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XWUAML3 Jelly Bean firmware is compatible only with the Samsung Galaxy Mega 5.8 (GT-I9152). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Mega 5.8 by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XWUAML3 Jelly Bean Firmware (Mirror Link 1, Link 2)
2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Mega 5.8 I9152 with Android 4.2.2 XWUAML3 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Mega 5.8.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Mega 5.8 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted I9152XWUAML3 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Mega 5.8 I9152 should be now updated with official Android 4.2.2 XWUAML3 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Mega 5.8 I9152 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

U.S. Cellular has started rolling out the Android 4.3 Jelly Bean update to its variant of the Galaxy Note 2 (SCH-R950). The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: R950VXUBMK3
CSC: R950USCBMK3
MODEM: R950VXUBMK3
Version: Android 4.3
Build date: Nov 11, 2013
Regions: U.S. (U.S. Cellular)

Samsung Galaxy Note 2 (U.S. Cellular) SCH-R950 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Note 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The Android 4.3 VXUBMK3 Jelly Bean firmware is compatible only with the U.S. Cellular version of Galaxy Note 2 (SCH-R950). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 2 by navigating to Settings >> About Phone.

Files Required
1. Android 4.3 VXUBMK3 Jelly Bean Firmware (Mirror Link)
2. Odin 3.07

Steps to Update Galaxy Note 2 (U.S. Cellular) SCH-R950 with Android 4.3 VXUBMK3 Jelly Bean Firmware
Step 1: Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 2.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted R950VXUBMK3 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Note 2 (U.S. Cellular) SCH-R950 should be now updated with the Android 4.3 VXUBMK3 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 2 (U.S. Cellular) SCH-R950 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Read More..

Free Download IDM 6.21 Build 17 Full Final Terbaru + Repack Tanpa Aktivasi : Baru saja kemarin IDM mengeluarkan versi terbarunya yaitu IDM 6.21 Build 16, sekarang idm sudah mengeluarkan versi terbarunya lagi sob, yaitu IDM 6.21 Build 17, mungkin idm akan selalu memanjakan para penggunanya, dengan selalu memperbaiki bugs-bugs error pada softwarenya, agar bisa dipergunakan secara optimal dalam mendownload file - file online secara cepat dan mudah oleh para pecinta softwarenya, maka dari itu Developers IDM selalu mengupdate software versi terbarunya terus menerus sob.

Internet download manager telah dipercaya oleh jutaan pengguna internet diseluruh dunia dan merupakan software downloader nomor satu saat ini, belum ada yang bisa menyaingi dan mengimbangi software download manager yang satu ini.

IDM diminati dan sangat dicari terutama bagi mereka yang suka download file besar seperti download film, game dan software karena IDM efektif mendongkrak kecepatan download sehingga download file besar jadi lebih cepat dan menghemat waktu tentunya.

Apa yang baru di IDM 6.21 Build 17

(Released: Dec 16, 2014)

• Fixed bugs

Langkah Aktivasi 

• Install IDM nya, kemudian Exit apabila muncul Fake Serial number
• Exit juga Di System TRY ( tanda panah ke atas deket Jam/bendera Pojok )
• klik kanan Patch.exe , pilih run as administrator
• Lalu klik tombol " Patch "
• Isi kolom dengan nama :

Jembersantri.com & Jembersantri.blogspot.com  ( ada 2 Kali ngisi)

• Selesai
• Wajib !!Copy Juga " IDMGrHlp.exe " ke : 

C:Program Files (x86)Internet Download Manager

• Jalankan IDM nya Apabila di About nya masih Unregistered
• Silahkan restart komputer
• Done

Link Download :

Apa yang baru di IDM 6.21 Build 17

(Released: Dec 16, 2014)

• Fixed bugs

Langkah Aktivasi 

• Install IDM nya, kemudian Exit apabila muncul Fake Serial number
• Exit juga Di System TRY ( tanda panah ke atas deket Jam/bendera Pojok )
• klik kanan Patch.exe , pilih run as administrator
• Lalu klik tombol " Patch "
• Isi kolom dengan nama :

kuyhAa & android19.com  ( ada 2 Kali ngisi)

• Selesai
• Wajib !!Copy Juga " IDMGrHlp.exe " ke : 

C:Program Files (x86)Internet Download Manager

• Jalankan IDM nya Apabila di About nya masih Unregistered
• Silahkan restart komputer
• Done

- See more at: http://www.kuyhaa-android19.com/2012/03/internet-donload-manager-610-full-new.html#sthash.JbebhizO.dpuf

Download IDM 6.21 Build 17 Full Final Version
Mirror Link : http://goo.gl/wiQCR0

Password : http://jembersantri.blogspot.com

Cara Download IDM 6.21 Build 17 :

1. Klik Link diatas dan nanti akan otomatis mendownload.
2. Klik 2x file installer IDM 6.21 Build 17 yang sobat download tersebut.
3. Tunggu sampai proses selesai. setelah proses selesai,,
4. Nanti File IDM 6.21 Build 17 full.rar akan muncul pada Desktop komputer anda.
5. Selesai - IDM 6.21 Build 17 Full Version berhasil sobat download. 

Sekian dulu ulasan saya tentang IDM 6.21 Build 17 Full Version Final Terbaru with Repack Tanpa Aktivasi ini, semoga bisa bermanfaat buat sobat http://jembersantri.blogspot.com.

Anda saat ini telah mengunjungi :

Title :  Download IDM 6.21 Build 17 

Url : http://jembersantri.blogspot.com/2014/12/idm-621-build-17-full-final-terbaru.html

Read More..